amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 227 rf coax connectors ssmt surface mount interconnect system catalog 1307191 revised 9-00 microminiature surface mount rf connectors features 3.0 [.118] mated height excellent interface retention flexible micro-coax cable 360 degree mated rotation tape and reel packaging available the amp next generation ssmt surface mount interconnect system is designed to provide superi- or electrical and mechani- cal performance for wireless communication applica- tions. the ssmt system occupies less printed circuit board (pcb) real estate than conventional through hole coaxial connectors. an innovative microstrip mount- ing pattern and plug recep- tacle design ensure reliable grounding and pcb reten- tion characteristics. the ssmt interconnect system allows closer pitch/spacing, standing 3.0 [.118] (fully mated height) off the board. the mated ssmt interface allows 360 degrees of rota- tion providing maximum pcb design flexibility. it has been designed to provide optimal retention for appli- cations where shock, vibra- tion or cable flexure may be encountered. force to dis- engage by cable load (cam- out) exceeds 300 grams. the ssmt system is designed to provide the performance of much larger industry standard connec- tors. the ssmt interconnect system con- sistently achieves broad band electrical perfor- mance through 6 ghz with a maximum vswr of 1.20:1 at 2 ghz. this broad band performance establishes a reliable interface that can be utilized for future system upgrades without concern for performance degradation. the ssmt utilizes a com- mon osmt plug receptacle, part number 1251802-1, which is designed for high volume assembly using sur- face mount technology and is available in tape and reel packaging for automatic pick and place board assembly. the mating cable jack is available terminated to a highly flexible micro- coax cable as either a pig- tail, jumper or standard interseries connector assembly to meet your needs. the ssmt interconnect system can be manually mated, facilitating high volume assembly and elimi- nating the need for special engagement tooling. the ssmt interface design aligns the center contacts prior to full mating to ensure a robust mechanical engagement. interface durability is rated at 100 mating cycles.
amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 228 rf coax connectors ssmt surface mount interconnect system (continued) catalog 1307191 revised 9-00 general materials smt plug housing: polyphenylene sulfide (pps) contacts: copper alloy ssmt cable jack outer contact: beryllium copper inner contact: beryllium copper dielectric: polypropylene, gf finish plug and cable jack - contacts: gold plate over nickel plate electrical frequency dc - 6 ghz nominal impedance 50 ohms voltage rating 250 volts (vrms maximum) @ sea level vswr (mated pair) 1.20:1 maximum @ 2 ghz 1.40:1 maximum @ 6 ghz insulation resistance 5000 megohms minimum dielectric withstanding voltage 500 volts (vrms minimum) @ sea level contact resistance (connectors only) center contact 15 milliohms maximum outer contact 10 milliohms maximum insertion loss (connectors only) .15db max. @ 6 ghz mechanical connector durability 100 mating cycles tape/reel packaging (plug) 12mm per eia-481 force to engage 5.5 lbs. max. (3.5 lbs. typ.) force to disengage (2.0 lbs. typ.) 4.0 lbs. max. (2.0 lbs. typ.) force to disengage by 300 grams min. (800 grams typ. initial mate) cable load (camout) environmental temperature rating (mated pair) -40? (-40?) to +125? (257?) resistance to solder heat infrared, convection and vapor phase solderable (plug only). maximum reflow time/temperature not to exceed 260? for 3 minutes. cable specifications materials jacket: fep (polytetrafluoroethylene) shield: silver plated copperwire, 44 awg, 90% min. coverage dielectric: ptfe ( polytetrafluoroethylene) center conductor: silver plated copper clad steel, 30 awg minimum bend radius 6.35mm (.250 inch) insertion loss (cable only) 0.5 db/ft., 2.0 db/m @ 1 ghz 0.9 db/ft., 3.0 db/m @ 2 ghz center conductor resistance .25 ohms per foot average. 819 milliohm/meter nom.; 250 milliohm/ft. nom. dia. ref. outer jacket shield (braid) 1.3 [.052] dia. ref. 1.0 [.040] dia. ref. 0.8 [.030] dia. ref. 0.3 [.010] center conductor dielectric specifications
amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 229 rf coax connectors ssmt surface mount interconnect system (continued) catalog 1307191 revised 9-00 straight smt pcb mount plug receptacle recommended mounting pattern for microstrip line right angle jack to jack cable assembly 3.4 [.132] ref. 2.1 [.081] ref. ssmt jack 5.3 [.208] ref. 1.3 [.052] ref. cable 2.5 [.100] dia. ref. length a centerline to centerline 5.0 [.197] 1.0 [.039] 4 plcs. 4.5 [.177] 2.1 [.081] 4.0 [.157] 4.5 [.177] center contact terminal 0.4 [.015] 2.1 [.049] 3.0 [.118] 0.6 [.025] 0.5 [.020] 4 plcs. center contact (pin) outer contact center contact terminal ground terminal (3 plcs.) notes: 1. printed wiring board material: glass epoxy. fr-4 or similar, rela- tive permittivity: 4.8, 1 oz. copper clad both sides. 2. these dimensions valid for 1.6 [.062] board thickness. notes: 1. consult amp for non-standard cable lengths. length a tolerances. length a tolerance 50 to 100 [3.94] 3 [ .12] 101 to 500 [3.98 to 19.69] 5 [ .20] over 500 [19.69] 10 [ .39] 2. connector centerlines align 30 as shown for lengths of 165 [6.5] or less. cable assemblies over 165 [6.5] have randomly aligned connectors. 3. ssmt jack is not mateable with osmt high retention plug receptacle (1055690-1) 9.0 [.354] 7.0 [.274] 6.0 [.236] 3.3 [.128] 0.5 [.019] 3.0 [.118] 0.5 [.020] via holes 3 plcs. 1.6 [.064] (see note 2) 1.2 [.047] 1.2 [.047] 0.6 [.024] 1.2 [.047] 5.3 [.207] 2.9 [.113] (see note 2) area free of solder mask 1 oz. [.0014] copper 1.2 [.047] 3.3 [.128] packaging quantity m/a-com model no. part no. bulk multiple of 100 2367-0000-54 1251802-1 178 dia. taping 800 pcs/reel 2367-5001-54 1083946-1 7.0 330 dia. taping 3000 pcs/reel 2367-5002-54 1055689-1 13.3 assembly length (a) m/a-com model no. part no. 100 [4.0] 9960-1100-24 1044764-1 200 [8.0] 9960-1200-24 1064530-1 305 [12.0] 9960-1304-24 1064533-1
amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 230 rf coax connectors ssmt surface mount interconnect system (continued) catalog 1307191 revised 9-00 right angle jack to jack cable assembly (180 offset) 2.1 [.081] 5.3 [.208] length a centerline to centerline ref. 1.3 [.052] ref. cable ssmt jack 2.5 [.100] ref. assembly length (a) m/a-com model no. part no. 100 [4.0] 9960-3100-24 1082845-1 200 [8.0] 9960-3200-24 1082846-1 305 [12.0] 9960-3305-24 1082847-1 assembly length (a) m/a-com model no. part no. 100 [4.0] 9960-2100-24 1064535-1 200 [8.0] 9960-2200-24 1064538-1 305 [12.0] 9960-2305-24 1064540-1 510 [20.0] 9960-2510-24 1064542-1 notes: 1. consult amp for non-standard cable lengths. cable length tolerance: length a tolerances. length a tolerance 50 to 100 [3.94] 3 [ .12] 101 to 500 [3.98 to 19.69] 5 [ .20] over 500 [19.69] 10 [ .39] 2. ssmt jack is not mateable with osmt high retention plug receptacle (1055690-1). 3. to avoid damaging the cable, minimize time at temperature while soldering and/or applying heat to unterminated end of cable. notes: 1. consult amp for non-standard cable lengths. cable length tolerance: length a tolerances. length a tolerance 50 to 100 [3.94] 3 [ .12] 101 to 500 [3.98 to 19.69] 5 [ .20] over 500 [19.69] 10 [ .39] 2. ssmt jack is not mateable with osmt high retention plug receptacle (1055690-1). 3. to avoid damaging the cable, minimize time at temperature while soldering and/or applying heat to unterminated end of cable. right angle jack cable pigtail 5.3 [.208] length a centerline to cable end ref. 2.5 [.100] dia. ref. 1.3 [.052] ref. cable ssmt jack 3.4 [.132] ref. 2.1 [.081] ref.
amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 231 rf coax connectors ssmt surface mount interconnect system (continued) catalog 1307191 revised 9-00 inter-series cable assemblies sma straight plug reference plane to centerline length a dia. ref. cable 1.3 [.052] ref. 19.2 [.757] ref. ssmt right angle jack 2.1 [.081] ref. 3.4 [.132] dia. ref. 2.5 [.100] notes: 1. consult amp for non-standard cable lengths: length a tolerances. length a tolerance 50 to 100 (3.94) 3 ( .12) 101 to 500 (3.98 to 19.69) 5 ( .20) over 500 (19.69) 10 ( .39) 2. connectors are randomly aligned unless otherwise noted. 3. ssmt jack is not mateable with osmt high retention plug receptacle (1055690-1). note: 1064552-1 recommended for customer system verification. sma bulkhead jack hex. 7.9 [.312] dia. min. 5.4 [.250] 6.0 [.235] min. length a reference plane to centerline 1.3 [.052] dia. ref. cable ref. 21.3 [.839] ref. ssmt right angle jack recommended mounting hole 2.1 [.081] ref. 3.4 [.132] dia. ref. 2.5 [.100] max. panel thickness 3.2 [.125] smb straight plug length a reference plane to centerline 1.3 [.052] dia. ref. cable ref. 21.9 [.862] ref. ssmt right angle jack 2.1 [.081] ref. 3.4 [.132] dia. ref. 2.5 [.100] assembly length (a) m/a-com model no. part no. 100 [4.0] 9960-4100-01 1064543-1 200 [8.0] 9960-4200-01 1064552-1 305 [12.0] 9960-4305-01 1064560-1 assembly length (a) m/a-com model no. part no. 100 [4.0] 9960-4100-02 1064544-1 200 [8.0] 9960-4200-02 1064553-1 305 [12.0] 9960-4305-02 1064561-1 assembly length (a) m/a-com model no. part no. 100 [4.0] 9960-4100-03 1064545-1 200 [8.0] 9960-4200-03 1064554-1 305 [12.0] 9960-4305-03 1064562-1
amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 232 rf coax connectors ssmt surface mount interconnect system (continued) catalog 1307191 revised 9-00 length a reference plane to centerline 1.3 [.052] dia. ref. cable ref. 16.8 [.662] ref. ssmt right angle jack 2.1 [.081] ref. 3.4 [.132] 4.8 [.189] dia. ref. dia. 2.5 [.100] 11.4 [.447] 6.4 [.250] hex. reco m mount 6.4 [.250] max. panel thickness length a reference plane to centerline 1.3 [.052] dia. ref. cable ref. 20.9 [.822] ref. ssmt right angle jack 2.1 [.081] ref. 3.4 [.132] dia. ref. 2.5 [.100] mcx bulkhead jack mcx straight plug hex. 6.4 [.250] hex. 7.9 [.312] 4.4 [.172] min. length a reference plane to centerline 1.3 [.052] dia. ref. cable ref. 17.1 [.675] 7.4 [.290] ref. ssmt right angle jack re mo 2.1 [.081] ref. 3.4 [.132] 2.5 [.100] dia. ref. max. panel thickness 2.4 [.093] smb bulkhead jack length a centerline to centerline 1.3 [.052] dia. ref. cable ref. 12.7 [.500] ref. ssmt right angle jack 2.1 [.081] ref. 3.4 [.132] 10.8 [.427] 14.0 [.550] dia. ref. 2.5 [.100] smb right angle plug inter-series cable assemblies (continued) assembly length (a) m/a-com model no. part no. 100 [4.0] 9960-4100-05 1064547-1 200 [8.0] 9960-4200-05 1064556-1 305 [12.0] 9960-4305-05 1064564-1 assembly length (a) m/a-com model no. part no. 100 [4.0] 9960-4100-06 1064548-1 200 [8.0] 9960-4200-06 1064557-1 305 [12.0] 9960-4305-06 1064565-1 dia. min. 4.9 [.192] 4.4 [.172] min. ref. ht k recommended mounting hole 2.1 081] assembly length (a) m/a-com model no. part no. 100 [4.0] 9960-4100-04 1064546-1 200 [8.0] 9960-4200-04 1064555-1 305 [12.0] 9960-4305-04 1064563-1 ref. ht k 2.1 081] dia. min. 4.9 [.192] 4.5 [.177] recommended mounting hole min. assembly length (a) m/a-com model no. part no. 100 [4.0] 9960-4100-07 1064549-1 200 [8.0] 9960-4200-07 1064558-1 305 [12.0] 9960-4305-07 1064566-1
amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 233 rf coax connectors ssmt surface mount interconnect system (continued) catalog 1307191 revised 9-00 length a centerline to centerline 1.3 [.052] dia. ref. cable 12.7 [.500] ref. ref. ssmt right angle jack 2.1 [.081] ref. 3.4 [.132] 6.1 [.241] 7.9 [.312] dia. ref. 2.5 [.100] mcx right angle plug ref. 101.6 [4.00] tools ssmt disengagement tool ssmt plug to sma jack adapter ref. 10.5 [.413] across flats ssmt plug sma jack 5.5 [.218] length a reference plane to centerline 1.3 [.052] dia. ref. cable ref. 31.8 [1.250] ref. ssmt right angle jack 2.1 [.081] ref. 3.4 [.132] dia. ref. 2.5 [.100] 50 ohm d-sub coaxial receptacle m/a-com model no. part no. 2598-5342-54 1221286-1 adapters ssmt to sma between series adapters m/a-com model no. part no. 2382-2240-00 1055696-1 ssmt jack to sma jack adapter ref. 12.9 [.508] across flats ssmt jack sma jack 5.5 [.218] ssmt jack to sma plug ref. 16.2 [.639] ssmt jack sma plug ssmt plug to sma plug adapter ref. 13.7 [.538] ssmt plug sma plug inter-series cable assemblies (continued) assembly length (a) m/a-com model no. part no. 100 [4.0] 9960-4100-08 1064550-1 200 [8.0] 9960-4200-08 1064559-1 305 [12.0] 9960-4305-08 1064567-1 assembly length (a) m/a-com model no. part no. 100 [4.0] 9960-4100-09 1064548-1 200 [8.0] 9960-4200-09 1064554-1 305 [12.0] 9960-4305-09 1064568-1 slide horizontal to engage tool lift vertical to disengage connector press vertical to engage connector optional use of engagement/disengagement tool note: the ssmt disengagement tool can be utilized as an optional engagement tool versus manual hand installation. m/a-com model no. part no. 2381-2241-00 1055695-1 m/a-com model no. part no. 2380-2240-00 1055694-1 m/a-com model no. part no. 2382-2241-00 1055697-1
amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 234 rf coax connectors engineering notes (continued) catalog 1307191 revised 9-00
|
